Victory Chrysler Dodge Jeep RAM

Discover The 2027 Ram Chassis Cab

near Lawrence, KS

Built as a blank canvas for upfitters, the 2027 Ram Chassis Cab spans the Class 3 Ram 3500, Class 4 Ram 4500, and Class 5 Ram 5500, with GVWRs from 11,040 to 19,500 lb. Business owners comparing the 2027 Ram Chassis Cab near Lawrence can pair a Regular or Crew Cab with four cab-to-axle lengths for dump, flatbed, or service bodies. Our team at Victory Chrysler Dodge Jeep Ram can walk you through those builds and our new Ram inventory.
2027 RAM Chassis Cabexterior

HEMI V8 or Cummins Diesel for Every Weight Class

Every model starts with a 6.4L HEMI V8 making 375 hp and 429 lb.-ft., while the available 6.7L Cummins Turbo Diesel I-6 makes 360 hp and 800 lb.-ft. at 1,800 rpm. Both use TorqueFlite HD eight-speed automatics with left- or right-side PTO capability, and the Cummins adds a two-speed split-shaft mode. Dump bodies leaving Gardner job sites need that torque.

  • Up to 43,000 lb. GCWR on diesel 5500 models
  • 7,710-lb. max payload on HEMI-powered 3500 models
  • Class-exclusive electronic front axle disconnect on 4x4 models
2027 RAM Chassis Cab seats

Work-Grade Cabs Built Around Crews and Tools

Regular Cab holds three and Crew Cab holds six, with 40.9 inches of front legroom in either. Tradesman uses a heavy-duty vinyl 40/20/40 split bench made to shrug off mud and spills, and the reconfigurable center console stows a 15-inch laptop. Crew Cab adds 40.2 inches of rear legroom plus available under-seat storage for tools and gear.

  • Leather-trimmed seating and heated steering wheel with the Laramie Trim Group
  • Available ventilated dual wireless charging pads
  • Sliding cup holder and wide smartphone/tablet dock
2027 RAM Chassis Cab dashboard

Uconnect 5 and Upfitter-Ready Electronics

A standard 8.4-inch Uconnect 5 touchscreen leads the cabin, and an available 12-inch digital cluster shows Trailer Light Check and Trailer Brake Status in the driver's line of sight. Adaptive Cruise Control with Stop can slow the truck to 0 mph even with a trailer attached, helpful in stop-and-go K-10 traffic. Forward Collision Warning with Active Braking rounds it out.

  • Vehicle System Interface Module with access to 70-plus inputs and outputs
  • Six-switch auxiliary bank, with a dedicated PTO switch when equipped
  • Available 2.4-kW onboard power system with three 110-volt outlets

What to Expect From the Updated 2027 Ram Chassis Cab

Two additions headline the 2027 model year. An available 270-degree surround view camera system now reaches the 3500, 4500, and 5500, and it includes a Mopar wired auxiliary camera along with trailer reverse guidance, a useful pairing for trucks wearing tall or wide upfit bodies. The other change is visual: a new Night Edition Package for Big Horn, including trucks with the Laramie Trim Group, in Regular Cab and Crew Cab form. It pairs with either the 6.4L HEMI V8 or the 6.7L Cummins and brings a darker, color-keyed look to a lineup usually finished for pure function.

  • Available 270-degree surround view camera system
  • Mopar wired auxiliary camera and trailer reverse guidance
  • Night Edition sport performance hood and black-painted wheels
  • Black badging with body-color grille surround, bumper, and fender flares

Why the 2027 Ram Chassis Cab Works Well for Shawnee-Area Commuters

For trades that roll out before sunrise, the 2027 Ram Chassis Cab has to handle both the drive and the job. Landscapers and plumbers based in Shawnee can spec the Crew Cab to carry six workers to a site without a second vehicle. Contractors hauling gravel or equipment out of Gardner benefit from the 5500's 19,500-lb. GVWR ceiling, while the Heavy Duty Snow Plow Prep Group, standard on 3500 models, keeps plow crews moving when winter storms hit Lawrence. The available 74-gallon dual fuel tank setup stretches the time between fill-ups on service routes, and electricians can run tools at remote sites from the available 2.4-kW onboard power system.

The Ownership Experience at Victory Chrysler Dodge Jeep Ram for Ram Drivers

Buying a work truck is only the first step, and our Kansas City, KS store is set up to support everything that comes after. Because chassis cabs are built around a specific job, we can submit a factory order with the exact cab, cab-to-axle length, powertrain, and trim your upfit requires, and fleet customers can coordinate multiple units with our team. Before you visit, you can check your trade-in value or complete our online financing application. Once the truck is earning its keep, our service department maintains it with technicians trained on Chrysler, Dodge, Jeep, and Ram products, genuine OEM parts, and approved fluids, and appointments can be booked online at any hour. Each visit is added to the truck's documented service history.